References

[1] Alsoy, S. and J. L. Duda, 1999. “Modeling of Multicomponent Drying of Polymer Films.” AIChE Journal, (45) 4, 896-905.

[2] Baaijens, F. P. T., 1994. “Application of Low-Order Discontinuous Galerkin Method to the Analysis of Viscoelastic Flows,” J. Non-Newtonian Fluid Mech., 52, 37-57.

[3] Baaijens, F. P. T., 1998. “An Iterative Solver for the DEVSS/DG Method with Application to Smooth and Non-smooth Flows of the Upper Convected Maxwell Fluid,” J. Non-Newtonian Fluid Mech., 75, 119-138.

[4] Baer, T. A., Schunk P. R., Cairncross, R. A., Rao, R. R., and Sackinger, P. A., 2000. “A finite element method for free surface flows of incompressible fluids in three dimensions. Part II. Dynamic Wetting Lines”, Int. J. Numer. Meth. Fluids, 33, 405-427.

[5] Bertram, L. A., Schunk P. R., Kempka, S. N., Spadafora, F., Minisandram, R., 1998. “The Macroscale Simulation of Remelting Processes”, J. of Metals, Minerals, Metals, and Materials Society, 50, 18-21. [6] Bird, R. B., Armstrong, R. C., and Hassager, O., 1987. Dynamics of Polymeric Liquids, 2nd ed., Wiley, New York, Vol. 1.

[7] Blacker, T. D., 1988. “FASTQ Users Manual: Version 1.2”, Sandia Technical Report SAND88-1326. [8] Bradford, S. F. and N. D. Katopodes, 2000. “The anti-dissipative, non-monotone behavior of Petrov- Galerkin Upwinding,” Int. J. Numer. Meth. Fluids, v. 33, 583-608.

[9] Brady, J. F. and Morris J. F., “Microstructure of strongly sheared suspensions and its impact on rheology and diffusion,”, J. of Fluid Mechanics, v. 348 pp.103-139, Oct 10, 1997.

[10] Brooks, A. N. and T. J. R. Hughes, 1992. “Streamline Upwind/Petrov-Galerkin Formulations for Convection Dominated Flows with Particular Emphasis on the Incompressible Navier-Stokes Equations,” Comp. Math. In Appl. Mechanics and Eng., 32, 199 - 259.

[11] Brown, R. A., M. J. Szady, P. J. Northey, and R. C. Armstrong, 1993. “On the Numerical Stability of Mixed Finite-Element methods for Viscoelastic Flows Governed by Differential Constitutive Equations”, Theoretical and Computational Fluid Mechanics, 5, 77-106.

[12] Cairncross, R. A., Chen, K. S., Schunk, P. R., Brinker, C. J., and Hurd, A. J., 1995. “Recent advances in theoretical modeling of deposition, drying, and shrinkage in sol-gel coating processes,” Proceedings on Computational Modeling of Materials and Processing Symposium at the American Ceramic Society National Meeting, Cincinnati, OH, 30 April - 3 May.

[13] Cairncross, R. A., P.R. Schunk, K.S. Chen, S. Prakash, J. Samuel, A.J. Hurd, and C. J. Brinker, 1996. “Drying in Deformable Partially Saturated Porous Media: Sol-Gel Coatings”, Sandia Technical Report, SAND96-2149.

[14] Cairncross, R. A., Schunk, P. R., Baer, T. A., Rao, R. R., and Sackinger, P. A., 2000. “A finite element method for free surface flows of incompressible fluids in three dimensions. Part I. Boundary fitted mesh motion.” Int. J. Numer. Meth. Fluids, 33, 375-403.

[15] Chen, K. S., Schunk, P. R., and Sackinger, P. A., 1995. “Finite element analyses of blade and slot coating flows using a Newton-Raphson pseudo-solid domain mapping technique and unstructured grids”, Proceedings of the 1995 TAPPI conference.

[16] Chen, K. S., Evans, G. H., Larson, R. S., Coltrin, M. E., and Newman, J., 1998. “Multi-dimensional modeling of thermal batteries using the Stefan-Maxwell formulation and the finite-element method”, in Electrochemical Society Proceedings, Volume 98-15, p. 138-149.

[17] Chen, K. S., Evans, G. H., Larson, R. S., Noble, D. R., and Houf, W. G., 2000. “Final Report on LDRD Project: A Phenomenological Model for Multicomponent Transport with Simultaneous Electrochemical Reactions in Concentrated Solutions”, Sandia Technical Report, SAND2000-0207.

[18] Davis, T.A. and I. S. Duff, 1997. “An unsymmetric-pattern multifrontal method for sparse LU factorization”, SIAM J. Matrix Analysis and Applications, January.

[19] Denbigh, K., 1981. The Principles of Chemical Equilibrium, Cambridge University Press, Cambridge.

[20] Dohrmann, C. R. and Bochev, P. B. 2004. “A stabilized finite element method for the Stokes problem based on polynomial pressure projections”, Int. J. Numer. Meth. Fluids, 46, pp183-201.

[21] Droux, J. J. and T. J. R. Hughes, 1994. “A Boundary Integral Modification of the Galerkin Least Squares Formulation for the Stokes Problem,” Comput. Methods Appl. Mech. Engrg., 113 (1994) 173-182.

[22] Duda, J. L., Vrentas, J. S., Ju, S. T., and Liu, H. T., 1982. “Prediction of Diffusion Coefficients for Polymer- Solvent Systems”, AIChE Journal, 28(2), 279-284.

[23] Fang, Z. W., Mammoli, A. A., Brady, J.F., Ingber, M.S., Mondy, L.A. and Graham, A.L., “Flow-aligned tensor models for suspension flows,” Int. J. of Multiphase Flow, v. 28(#1) pp. 137-166, January 2002.

[24] Flory, P.,1953. Principles of Polymer Chemistry, Cornell University Press, New York.

[25] Fortin, M. and A. Fortin, 1989. “A New Approach for the FEM Simulations of Viscoelastic Flow”, J. Non-Newtonian Fluid Mech., 32, 295-310.

[26] Garside, J. and M.R. Al-Dibouni, 1977. “Velocity-voidage relationship for fluidization and sedimentation in solid-liquid systems,” Ind. Eng. Chem. Process Des. Dev., 16, 206.

[27] Gartling, D. K., 1987. “NACHOS 2: A Finite Element Computer Program for Incompressible Flow Problems - Part 2 - User’s Manual”, Sandia Technical Report, SAND86-1816.

[28] Gartling, D. K., 1996. “TORO II - A Finite Element Computer Program for Nonlinear Quasi-Static Problems in Electromagnetics, Part I - Theoretical Background”, Sandia Technical Report, SAND95-2472.

[29] Gartling, D. K., C. E. Hickox and R. C. Givler, 1996. “Simulations of Coupled Viscous and Porous Flow Problems”, Comp. Fluid Dynamics, 7, 23-48.

[30] Gates, I. D., Labreche, D. A., and Hopkins, M. M., 2000. “Advanced Capabilities in GOMA 3.0 - Augmenting Conditions, Automatic Continuation and Linear Stability Analysis”, Sandia Technical Report, SAND2000-2465.

[31] Gilkey, A. P. and Glick, J. H., 1989. “BLOT - A Mesh and Curve Plot Program for the Output of a Finite Element Analysis”, Sandia Technical Report, SAND88-1432.

[32] Givler, R. C. and S. A. Altobelli, 1994. “A Determination of the Effective Viscosity for the Brinkman- Forchheimer Flow Model”, J. Fluid Mechanics, 258, 355-370.

[33] Glass, M. W., 1995. Personal communication.

[34] Golub, G. H. and C. F. V. Loan, 1996. Matrix Computations, Johns Hopkins University Press, Baltimore, MD 3rd ed.

[35] Gooray, A., Roller, G., Galambos, P., Zavadil, K., Givler, R., Peter, F. and Crowley, J., A MEMS Ejector for Printing Applications, Proceedings of the Society of Imaging Science & Technology, Ft. Lauderdale FL, September 2001.

[36] Griffiths, D.F., 1997. “The ‘no boundary condition’ outflow boundary condition,” Int. J. Numer. Meth. Fluids, 24, 393-411.

[37] Guenette, R. and M. Fortin, 1995. “A New Mixed Finite Element Method for Computing Viscoelastic Flow,” J. Non-Newtonian Fluid Mech., 60 27-52.

[38] Gundersen, E. and H. P. Langtangen, 1997. “Finite Element Methods for Two-Phase Flow in Heterogeneous Porous Media,” in Numerical Methods and Software Tools in Industrial Mathematics, Morten Daehlen, Aslak Tveito, Eds., Birkhauser, Boston.

[39] Helmig, R. and R. Huber, 1988. “Comparison of Galerkin-type discretization techniques for two-phase flow in heterogeneous porous media,” Advances in Water Resources, 21, 697-711.

[40] Heroux, M. A., 1992. “A proposal for a sparse BLAS toolkit.” Technical Report, TR/PA/92/90, CERFACS, December.

[41] Hood, P., 1976. “Frontal Solution Program for Unsymmetric Matrices”, Int. J. Numer. Meth. Engr., 10, 379-399.

[42] Hopkins, M. M., Mondy, L. A., Rao, R. R., Altobelli, S. A., Fang, Z., Mammoli, A. A. and Ingber, M. S., 2001. “Three-Dimensional Modeling of Suspension Flows with a Flow-Aligned Tensor Model”, The 3rd Pacific Rim Conference on Rheology, July 8-13, 2001, Vancouver, B.C., Canada.

[43] Hudson, N. E. and Jones, T. E. R., 1993. “The A1 project - an overview”, J. Non-Newtonian Fluid Mech, 46, 69-88.

[44] Hughes, T. J. R. and L. P. Franca, 1987. “A New Finite Element Formulation for Computational Fluid Dynamics: VII The Stokes Problem with Various Well-Posed Boundary Conditions: Symmetric Formulations that Converge For All Velocity/Pressure Spaces,” Comput. Methods Appl. Mech. Engrg., 65, 85- 96.

[45] Hughes, T. J. R., L. P. Franca and M. Balestra, 1986. “A New Finite Element Formulation for Computational Fluid Dynamics: V. Circumventing the Babuska-Brezzi Condition: A Stable Petrov-Galerkin Formulation of the Stokes Problem Accommodating Equal-Order Interpolations,” Comput. Methods Appl. Mech. Engrg., 59, 85-99.

[46] Hutchinson, S. A., Shadid, J. N. and Tuminaro, R. S., 1995. “Aztec User’s Guide Version 1.0”, Sandia Internal Report, SAND95-1559.

[47] Irons, B. M., 1970. “A frontal solution program for finite element analysis,” Int. J. Numer. Meth. Eng., 2:5-12.

[48] Kernighan, B. W. and Ritchie, D. M., 1988. The C Programming Language, 2nd Ed., PTR Prentice Hall, New Jersey.

[49] Kistler, S. F. and Scriven, L. E., 1983. Coating Flows. In Computational Analysis of Polymer Processing. Eds. J. A. Pearson and S. M. Richardson, Applied Science Publishers, London.

[50] Kool, J. B. and Parker, J. B., 1987. “Development and Evaluation of Closed-Form Expressions for Hysteretic Soil Hydraulic Properties”, Water Resources Research, Vol. 23, pp 105-114.

[51] Krishnan, G. P., S. Beimfohr, and D. Leighton, 1996. “Shear-induced radial segregation in bidisperse suspensions,” J. Fluid Mech. 321, 371

[52] Kundert, K. S. and Sangiovanni-Vincentelli, A., 1988. “Sparse User’s Guide: Version 1.3a” Dept. of Electrical Engineering and Computer Sciences, University of California, Berkeley.

[53] Labreche, D. A., Wilkes, E. D., Hopkins, M. M. and Sun, A. C., 2006. “Advanced Capabilities in GOMA 5.0 - Augmenting Conditions, Automatic Continuation and Linear Stability Analysis”, Sandia Technical Report (in preparation).

[54] Malvern, L. E., 1969, Introduction to the Mechanics of a Continuous Medium, Prentice-Hall

[55] Martinez, M. J., 1995. “Formulation and Numerical Analysis of Nonisothermal Multiphase Flow in Porous Media”, Sandia Technical Report, SAND94-0379.

[56] Martinez, M. J. 1995, “Mathematical and Numerical Formulation of Nonisothermal Multicomponent Three-Phase Flow in Porous Media”, Sandia Technical Report, SAND95-1247.

[57] Martys, N., D. P. Bantz and E. J. Barboczi, 1994. “Computer Simulation Study of the Effective Viscosity in Brinkman’s Equation.” Phys. Fluids, 6, 1434-1439

[58] Morris, J. F. and Boulay, F., “Curvilinear flows of noncolloidal suspensions: The role of normal stresses,” J. of Rheology, v. 43(#5) pp. 1213-1237 Sep-Oct 1999.

[59] Newman, J. S., Electrochemical Systems, Prentice Hall, Inc., Englewood Cliffs, New Jersey (1991).

[60] Papanastasiou, T. C., 1987. “Flows of Materials with Yield”, Journal of Rheology, 31 (5), 385-404.

[61] Papanastasiou, T. C., N. Malamataris, and K. Ellwood, 1992. “A New Outflow Boundary Condition”, Int. J. for Numerical Methods in Fluids, 14, 587-608.

[62] Papananstasiou, T. C., and Boudouvis, A. G., 1997. “Flows of Viscoplastic Materials: Models and Computation,” Computers & Structures, Vol 64, No 1-4, pp 677-694.

[63] Patterson, D., Y.B. Tewari, H.P. Schreiber, and J.E. Guillet, 1971. “Application of Gas-Liquid Chromatography to the Thermodynamics of Polymer Solutions”, Macromolecules, 4, 3, 356-358.

[64] PDA Engineering, 1990. “PATRAN Plus User Manual”, Publication No. 2191024, Costa Mesa, California, January.

[65] Phillips, R.J., R.C. Armstrong, and R.A. Brown, 1992. “A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration”, Physics of Fluids A, 4(1), 30-40.

[66] Price, P. E., Jr., S. Wang, I. H. Romdhane, 1997. “Extracting Effective Diffusion Parameters from Drying Experiments”, AIChE Journal, 43, 8, 1925-1934.

[67] Rajagopalan, D., R. C. Armstrong and R. A. Brown, 1990. “Finite Element Methods for Calculation of Viscoelastic Fluids with a Newtonian Viscosity”, J. Non-Newtonian Fluid Mech., 36 159-192.

[68] Rao, R. R., Mondy, L. A., Schunk, P. R., Sackinger P. A., and Adolf, D. B., 2001. “Verification and Validation of Encapsulation Flow Models in GOMA, Version 1.1”, Sandia Technical Report, SAND2001- 2947.

[69] Renardy, M., 1997. “Imposing ‘NO’ boundary conditions at outflow: Why does this work?” Int. J. for Numerical Methods in Fluids, 24, 413-417.

[70] Rew, R. K., Davis, G. P., and Emmerson, S., 1993. “NetCDF User’s Guide: An Interface for Data Access”, Version 2.3, University Corporation for Atmospheric Research, Boulder, Colorado, April.

[71] Saad, Y., 1994. “ILUT: a dual threshold incomplete ILU factorization”, Numerical Linear Algebra with Applications, 1:387-402.

[72] Sackinger, P. A., Schunk, P. R. and Rao, R. R., 1996. “A Newton-Raphson Pseudo-Solid Domain Mapping Technique for Free and Moving Boundary Problems: A Finite Element Implementation”, J. Comp. Phys., 125, 83-103.

[73] Salinger, A. G., N.M. Bou-Rabee, E.A. Burroughs, R.B. Lehoucq, R.P. Pawlowski, L.A. Romero, and E.D. Wilkes, 2002. “LOCA 1.0: Theory and Implementation Manual”, Sandia Technical Report, SAND2002-0396.

[74] Sani, R. L., and P. M. Gresho, 1994. “Resume and remarks on the open boundary condition minisymposium,” Int. J. for Numerical Methods in Fluids, 18, 983-1008.

[75] Scherer, G.W., 1992. “Recent Progress in Drying of Gels”, J. of Non-Crystalline Solids, 147 & 148, 363- 374.

[76] Schoof, L. A. and Yarberry, V. R., 1994. “EXODUS II: A Finite Element Data Model”, Sandia Technical Report, SAND92-2137.

[77] Schunk, P. R., 1999. “TALE: An Arbitrary Lagrangian-Eulerian Approach to Fluid-Structure Interaction Problems”, Sandia Technical Report, SAND2000-0807.

[78] Schunk, P. R., Sackinger, P. A., Rao, R. R., Chen, K. S., Cairncross, R. A., Baer, T. A., and Labreche, D. A., 1997. “GOMA 2.0- A Full-Newton Finite Element Program for free and Moving boundary Problems with Coupled Fluid/Solid Momentum, Energy, Mass, and chemical Species Transport: User’s Guide”, SAND97-2404.

[79] Schunk, P. R. and Shadid, J. N., 1992. “Iterative Solvers in Implicit Finite Element Codes” Sandia Technical Report, SAND92-1158.

[80] Schunk, P. R. and Rao, R. R., 1994. “Finite element analysis of multicomponent two-phase flows with interphase mass and momentum transport”, Int. J. Numer. Meth. Fluids, 18, 821-842.

[81] Schunk, P. R., M. A. Heroux, R. R. Rao, T. A. Baer, S. R. Subia and A. C. Sun., 2002. “Iterative Solvers and Preconditioners for Fully-coupled Finite Element Formulations of Incompressible Fluid Mechanics and Related Transport Problems”, Sandia Technical Report, SAND2001-3512J.

[82] Schwartz, L.W., R.A. Cairncross and D.E. Weidner, 1996. “Anomalous Behavior During Leveling of Thin Coating Layers with Surfactant”, Phys. Fluids, 8, (7), 1693-1695.

[83] Segalman, D., Witkowski, W., Adolf, D. and Shahinpoor, M., 1992. “Theory and Application of Electrically Controlled Polymeric Gels”, Smart Mater. Struct., 1, 95-100.

[84] Shadid, J. N., Moffat, H. K., Hutchinson, S. A., Hennigan, G. L., Devine, K. D. and Salinger, A. G., 1995. “MPSalsa: A finite element computer program for reacting flow problems, Part 1 - Theoretical development.” Sandia Technical Report, SAND95-2752.

[85] Sjaardema, G. D., 1992. “APREPRO: An Algebraic Preprocessor for Parameterizing Finite Element Analyses”, Sandia Technical Report, SAND92-2291.

[86] Sjaardema, G. D., 1993. “Overview of the Sandia National Laboratories Engineering Analysis Code Ac cess System”, Sandia Technical Report, SAND92-2292.

[87] Sun, J., N. Phan-Thien, R. I. Tanner, 1996. “An Adaptive Viscoelastic Stress Splitting Scheme and Its Applications: AVSS/SI and AVSS/SUPG,” J. Non-Newtonian Fluid Mech., 65, 75-91.

[88] Sun, J., M. D. Smith, R. C. Armstrong, R. A. Brown, 1999. “Finite Element Method for Viscoelastic Flow Bases on the Discrete Adaptive Viscoelastic Stress Splitting and the Discontinuous Galerkin Method: DAVSS-G/DG,” J. Non-Newtonian Fluid Mech., 86, 281-307.

[89] Tam, S. Y., 1997. “Stress Effects in Drying Coatings”, Ph. D. Thesis, University of Minnesota,. Available on from University Microfilms, Ann Arbor, MI.

[90] Taylor, R. and R. Krishna, 1993. Multicomponent Mass Transfer. John Wiley & Sons, New York. [91] Tuminaro, R. S., Heroux, M. A., Hutchinson, S. A. and Shadid, J. N., 1999. “Official Aztec User’s Guide Version 2.1”, Sandia Technical Report, SAND99-8801J.

[92] Unger, A. J. A., P. A. Forsyth and E. A. Sudicky, 1996. “Variable spatial and temporal weighting schemes for use in multi-phase compositional problems,” Advances in Water Resources, 19, 1 - 27.

[93] Vrentas, J.S., J.L. Duda and H.-C. Ling, 1984. “Self-Diffusion in Polymer-Solvent-Solvent Systems”, Journal of Polymer Sciences: Polymer Physics edition, (22), 459-469.

[94] Zhang K. and A. Acrivos, 1994, “Viscous resuspension in fully-developed laminar pipe flows,” Int. J. Multiphase Flow, (20)3, 579-591.

[95] Zielinski, J.M. and B.F. Hanley, 1999. “Practical Friction-Based Approach to Modeling Multicomponent Diffusion.” AIChE Journal, (45)1, 1-12.

[96] Zlatev, Z., Wasniewski, J., and Schaumburg, K., 1981. “Y12M. Solution of large and sparse systems of linear algebraic equations.” Lecture notes in computer science, 121, Springer-Verlag, New York.